PLANET WGSD-10020 - Manual (Page 323)

User’s Manual of WGSD / WGSW Layer 2+ Series
The page includes the following fields:
Object Description
 Sequential Power up
Option
Allows user to enable or disable Sequential Power up function.
 Sequential Power up
Interval
Allows user to configure the PoE Port Start Up interval time.
 Sequential Power up
Port Option
There are two modes for Starting Up the PoE Port
By Port: The PoE Port will start up by following Port number.
By Priority: The PoE Port will start up by following the PoE Priority.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.16.5 Port Configuration
This section allows the user to inspect and configure the current PoE port settings as Figure 4-16-4 shows.
Figure 4-16-4: Power over Ethernet Configuration Screenshot
The page includes the following fields:
Object Description
 PoE Mode There are three modes for PoE mode.

Enable : enable PoE function..

Disable : disable PoE function.

Schedule : enable PoE function in schedule mode.
 Schedule Indicates the scheduled profile mode. Possible profiles are:
323