PLANET WGSD-10020 User Manual
Page 26

User’s Manual of WGSD / WGSW Layer 2+ Series
PoE Power Supply Type
- End-Span
Power Pin Assignment
-
1/2(+), 3/6(-)
PoE Power Output
-
Per port 56V DC, 30.8 watts (max.)
PoE Power Budget
-
220 watts (max.)
440 watts (max.)
PD @ 7 watts
-
24 units
24 units
PD @ 15.4 watts
-
14 units
24 units
PoE Ability
PD @ 30.8 watts
-
7 units
14 units
Layer 2 functions
Port Configuration
Port disable / enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable / enable
Port Status
Display each port’s speed duplex mode, link status, flow control status,
auto-negotiation status, trunk status
Port Mirroring
TX / RX / both
Many-to-1 monitor
VLAN
802.1Q tagged-based VLAN
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
IP Subnet-based VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP / Static Trunk
5 groups of 5-port trunk supported
Spanning Tree Protocol
STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
Up to 32 MSTP instances
QoS
Traffic classification based, Strict priority and WRR
8-Level priority for switching
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP packet
IGMP Snooping
IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
IGMP Querier mode support
MLD Snooping
MLD (v1/v2) Snooping, up to 255 multicast groups
MLD Querier mode support
Access Control List
IP-based ACL / MAC-based ACL
Up to 256 entries
Bandwidth Control
Per port bandwidth control
Ingress: 100Kbps~1000Mbps
Egress: 100Kbps~1000Mbps
Layer 3 Functions
IP Interfaces
Max. 8 VLAN interfaces
Routing Table
Max. 32 routing entries
Routing Protocols
IPv4 software static routing
IPv6 software static routing
Management
Functions
26