PLANET FGSD-1022 - Manual (Page 80)

User’s Manual of FGSD-1022 Series
4.4.4.2 VLAN Filter
 802.1Q VLAN Port Configuration
This page is used for configuring the Switch port VLAN. The VLAN per Port Configuration page contains fields for managing
ports that are part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN Port Configuration page. All
untagged packets arriving to the device are tagged by the ports PVID.
This section provides 802.1Q Ingress Filter of each port from the Switch, the screen in Figure 4-4-7 appears.
Figure 4-4-7: 802.1Q Ingress filter interface
The page includes the following fields:
80
Object Description
NO
Indicate port 1 to port 10.
PVID Set the port VLAN ID that will be assigned to untagged traffic on a given port.
This feature is useful for accommodating devices that you want to participate in
the VLAN but that don’t support tagging.
The switch each port allows user to set one VLAN ID, the range is 1~255, default
VLAN ID is 1.