7 administration configuration, 1 change username / password, Collision-retry – PLANET FGSD-1022 User Manual
Page 171: Hostname, No hostname, No] password
User’s Manual of FGSD-1022 Series
171
Unicast/Multicast
: Flood unicast/multicast filter
Control Packets
: Control packets filter
IP multicast
: IP multicast packets filter
Broadcast Packets
: Broadcast Packets filter
Syntax:
broadcast select
<unicast/multicast | control packet | ip multicast | broadcast >
Collision-Retry
Description:
Collision-Retry setting
Syntax:
Collision-Retry < off | 16 | 32 | 48 >
Parameters:
16\32\48
– In Half-Duplex, collision-retry maximum is 16\32\48 times and packet will be dropped if collisions still happen
Disable
– In Half-Duplex, if happen collision will retry forever (Default).
6.7 Administration Configuration
6.7.1 Change Username / Password
hostname
Description:
Set switch name.
Syntax:
hostname
<name-str>
Parameters:
<name-str> specifies the switch name. If you would like to have spaces within the name, use quotes (“”) around the
name.
no hostname
Reset the switch name to factory default setting.
[no] password
Description:
Set or remove username and password for manager or operator.
Syntax:
[no] password