PLANET FGSD-1022 - Manual (Page 3)

User’s Manual of FGSD-1022
UL Warning
This equipment is only to be connected to PoE networks without routing to outside plant.
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of
the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the
equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe
operation of the equipment is not compromised.
C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved
due to uneven mechanical loading.
D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the
effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration
of equipment nameplate ratings should be used when addressing this concern.
E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be
given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).
Revision
PLANET 8-Port 10/100Mbps + 2 Gigabit TP/SFP Managed Switch User’s manual
FOR MODELS: FGSD-1022 / FGSD-1022P / FGSD-1022HP
REVISION: 1.2 (JUN, 2012)
Part No.: EM-FGSD-1022 (2080-A92350-008)