PLANET FGSD-1022 - Manual (Page 153)

User’s Manual of FGSD-1022 Series
153
1. For security reason, please change and memorize the new username and password after this
first setup.
Username Max: 6, Min: 1 characters.
Password Max: 6, Min: 1 characters.
2. Only accept command in lowercase letter under console interface.
5.2 Configure IP address
The FGSD-1022 Managed Switch is shipped with default IP address as following.
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please use the procedures as follow:
 Show the current IP address
1. On ”Switch# ” prompt, enter “configure”.
2. On ”Switch(config)# ” prompt, enter “show ip”.
3. The screen displays the current IP address, Subnet Mask and Gateway. As show in Figure 5-2-1 .
Figure 5-2-1: Show IP information screen