Console management, 1 login in the console interface – PLANET FGSD-1022 User Manual
Page 152
User’s Manual of FGSD-1022 Series
5. CONSOLE MANAGEMENT
The PLANET FGSD-1022 series is equipped with a RS-232 DB9 connector as default. And both of the two models support
telnet management.
5.1 Login in the Console Interface
To configure the system via console mode, connect a serial cable to a COM port on a PC or notebook computer and to
RJ-45 type serial (console) port of the Managed Switch. The console port of the Managed Switch is DCE already, so that
you can connect the console port directly through PC without the need of Null Modem.
Please refer to
chapter 3.5- Administration Console
to get more information about how to connect to the console
interface of FGSD-1022P with HyperTerminal on Microsoft Windows platform.
Once the terminal has connected to the device, power on the FGSD-1022P, the terminal will display that it is running testing
procedures.
Then, the following message asks the login password. The factory default password as following and the login screen in
Figure 5-1
appears.
Username: admin
Password: admin
Figure 5-1:
FGSD-1022 Console Login screen
152