PLANET FGSD-1022 - Manual (Page 203)

User’s Manual of FGSD-1022 Series
203
6.18.3 Configure PoE -- System
poe limit-mode
Description:
Configure System PoE power limit mode information
Command Level
Global Configuration
Syntax:
poe limit-mode { Consumption / Classification / Total-Limit }
Parameters:
Power is allocated according to the actual need of each PD.
The system will handle power allocation according to class (0 to 4)
<Total Limit> Set limit value of the total POE port provided power to the PDs
Example:
Switch(config)# poe limit-mode Consumption
Switch (config)# show poe
Maximum Available Power
System Operation Status
POE Admin mode
Temperature Unit1
Temperature Unit2
Over Temperature
PoE Power Consumption
Temperature Threshold
Usage
Usage Threshold
PoE Power limit mode
:150Watts
: on
: Enable
: 38C/100F
:35C/95F
: 55 watts
: 30%
: 60
: 0%
: 100%
: Consumption
poe admin-mode
Description:
Configure System PoE Admin mode information
Command Level
Global Configuration
Syntax:
poe admin-mode { enable / disable }
[no] poe admin-mode