PLANET FGSD-1008HPS - Manual (Page 9)

User’s Manual of FGSD / FGSW Web Smart PoE Switch
9
1.4 Product Features
 Physical Port
 8/16/24 10/100BASE-TX RJ45 copper with PoE in-line supported
 2-port 10/100/1000BASE-T RJ45 copper
 2 1000BASE-X mini-GBIC/SFP slots to share with Giagabit Ethernet
 Reset button for system management
 Power over Ethernet
 Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
 Complies with IEEE 802.3af Power over Ethernet End-Span PSE
 Supports PoE Power up to 30.8 watts for each PoE port
 Detects powered device (PD) automatically
 Circuit protection prevents power interference between ports
 Remote power feeding up to 100m
 PoE Power Usage
 PoE Management
 Per port PoE function enable/disable
 PoE Port Power feeding priority
 Per PoE port power limit
 PD classification detection
 PoE Power sequential
 Layer 2 Features
 Auto-MDI/MDI-X detection on each RJ45 port
 Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
 Supports broadcast storm control
 Supports VLAN :
- IEEE 802.1Q tag-based VLAN, up to 32 VLANs groups, out of 4095 VLAN IDs
- Port-based VLAN, up to 16 VLAN groups
- MTU VLAN (Multi-tenant Unit VLAN)
 Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (Static Trunk)
 Supports Spanning Tree Protocol
- STP, IEEE 802.1D Spanning Tree Protocol
- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
 Port mirroring to monitor the incoming or outgoing traffic on a particular port
 Provides port mirror (Many-to-1)
 Quality of Service
 2 priority queues on all switch ports
 Traffic classification
- Port-based priority
- IEEE 802.1p-based priority
- IP TOS / DSCP-based priority
- TCP / UDP port-based QoS
 Strict priority and Weighted Round Robin (WRR) CoS policies