PLANET FGSD-1008HPS - Manual (Page 77)

User’s Manual of FGSD / FGSW Web Smart PoE Switch
77
-Range: 0-240 , in steps of 16
 Path Cost
(1~200000000)
Controls the path cost incurred by the port. The Auto setting will set the path cost
as appropriate by the physical link speed, using the 802.1D recommended
values. Using the Specific setting, a user-defined value can be entered. The path
cost is used when establishing the active topology of the network. Lower path
cost ports are chosen as forwarding ports in favor of higher path cost ports. Valid
values are in the range 1 ~ 200000000 .
The STP Port Status screen in Figure 4-7-8 appears.
Figure 4-7-8 STP Port Status Page Screenshot
The page includes the following fields:
Object Description
 Path Cost Display the STP Mode Status
 Priority Display the Port Priority
 Status Display the Port Status
 Status Display the Port Status
Button
: Click to apply changes