PLANET FGSD-1008HPS - Manual (Page 48)

User’s Manual of FGSD / FGSW Web Smart PoE Switch
48
4.3.3 Bandwidth Control
This page provides the selection of the ingress and egress bandwidth preamble. The Bandwidth Control Setting and Status
screens in Figures 4-3-4 and 4-3-5 appear.
Figure 4-3-4 Ingress Bandwidth Control Settings Page Screenshot
The page includes the following fields:
Object Description
 Port No Select port number for this drop-down list to enable the function.
 Tx Rate Configure the Tx rate for the selected port.
Valid values are in the range from 0 to 255; 0 is unlimited rate.

Rx Rate Configure the Rx rate for the selected port.
Valid values are in the range from 0 to 255; 0 is unlimited rate.
 Speed Base Configure the speed limitation mode. The possible field values are:
Low
Tx/Rx bandwidth limitation (Kbps) = Tx/Rx Rate (0~255) x 32Kbps (Port 1~Port 18)
High
Tx/Rx bandwidth limitation (Kbps) = Tx/Rx Rate (0~255) x 256Kbps (10/100Mbps ports)
Tx/Rx bandwidth limitation (Kbps) = Tx/Rx Rate (0~255) x 2048Kbps (Gigabit ports).
Buttons
: Click to apply changes
: Click to restore default settings