PLANET FGSD-1008HPS - Manual (Page 100)

User’s Manual of FGSD / FGSW Web Smart PoE Switch
100
This page allows configuring SNMP functions Settings. The SNMP functions Settings screen in Figure 4-13-1 appears.
Figure 4-13-1 SNMP Configuration Page Screenshot
The page includes the following fields:
Object Description
 Community Name A string identifying the SNMP Community name that this entry should belong to.
 Access Right Indicates the SNMP community type operation. Possible types are:
RO=Read Only : Set access string type in read-only mode.
RW=Read/Write : Set access string type in read-write mode.
 System Descrition A string identifying the System Descrition name that this entry should belong to.
 System Contact A string identifying the System Contact name that this entry should belong to.
 System Location A string identifying the System Location name that this entry should belong to.
 Trap State Indicates the SNMP Trap State operation. Possible types are:
Enabled : Enable SNMP Trap State operation
Disabled : Disable SNMP Trap State operation
 Enable Trap Server Indicates the SNMP Trap Server operation. Possible types are:
Enabled : Enable SNMP Trap Server operation
Disabled : Disable SNMP Trap Server operation
 Trap Server Address Configure the SNMP Trap Server IP address
 Trap Server Status Display the SNMP Trap Server status
Button
: Click to apply changes