PLANET FGSD-1008HPS - Manual (Page 81)

User’s Manual of FGSD / FGSW Web Smart PoE Switch
81
port for the frame.
MAC Address Source & Destination : The MAC Address Source & Destination
can be used to calculate the port for the frame.
 Member Select port number for this drop down list to esatablish Link Aggregation.
 Status Indicates the LAG status operation. Possible statuses are:

Enabled - Start up the LAG manually.

Disabled - Shutdown the LAG manually.
 Type Indicates the trunk type.

Static : Force aggregared selected ports to be a trunk group.

LACP : LACP LAG negotiate Aggregated Port links with other LACP ports
located on a different device. If the other device ports are also LACP ports,
the devices establish a LAG between them.
 Operation Key The Key value incurred by the port, range 1-65535 . The Auto setting will set the
key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3.
Using the Specific setting, a user-defined value can be entered. Ports with the
same Key value can participate in the same aggregation group, while ports with
different keys cannot.
The default setting is “Auto”
 Time Out The Timeout controls the period between BPDU transmissions.
Short will transmit LACP packets each second, while Long will wait for 30
seconds before sending a LACP packet.
 Activity The Role shows the LACP activity status. The Active will transmit LACP packets
per second, while Passive will wait for a LACP packet from a partner (speak if
spoken to).
Buttons
: Click to apply changes
: Click to refresh the page.