PLANET FGSD-1008HPS - Manual (Page 17)

User’s Manual of FGSD / FGSW Web Smart PoE Switch
17
■ Gigabit SFP Slots
1000BASE-SX/LX mini-GBIC slot, SFP (Small Factor Pluggable) transceiver module: From 550 meters (Multi-mode fiber),
up to 10/20/30/40/50/60/70/120 kilometers (Single-mode fiber).
■ Reset Button
On the left side of the front panel, the reset button is designed for rebooting the PoE Web Smart Switch without turning off
and on the power. The following is the summary table of Reset button functions :
Reset Button Pressed and Released Function
< 5 sec : System Reboot Reboot the PoE Web Smart Switch.
> 5 sec : Factory Default
Reset the PoE Web Smart Switch to Factory Default
configuration. The PoE Web Smart Switch will then reboot
and load the default settings as shown below:

Default Username: admin
 Default Password: admin
 Default IP address: 192.168.0.100
 Subnet mask: 255.255.255.0
 Default Gateway: 192.168.0.254
2.1.2 LED Indications
The front panel LEDs indicate instant status of port links, data activity and system power, and help monitor and troubleshoot
when needed. Figures 2-2-A ~ 2-2-D show the LED indications of these PoE Web Smart Switches.
FGSD-1008HPS LED Indication
Figure 2-2-A FGSD-1008HPS LED panel
 System
LED Color Function
PWR Green Lights to indicate that the Switch has power.
 Per 10/100Mbps Port with PoE Interfaces (Port1 to Port8)
LED Color Function
Lights: Indicates the link through that port is successfully established at 10/100Mbps.
LNK/ACT Green
Blinks: Indicates that the Switch is actively sending or receiving data over that port.
Lights : Indicates the port is providing 52V DC in-line power.
PoE In-Use Orange
Off : Indicates the connected device is not a PoE Powered Device (PD).