Avago Technologies ACPL-224-500E - Manual (Page 55)

AV02-4387EN 52 Avago Technologies
Isolated Interface for Intelligent Power Module Gate Drive
Motor Control Applications
Description
The HCPL-4506 provides isolation
between the controller and the IPM
(Intelligent Power Module). This
optoisolator provides world wide
safety certification (UL, CSA, IEC/EN/
DIN EN 60747-5-2). The HCPL-4506
optocouplers can reject common
mode transients that have slew rates
as high as 15 kV/ µs and peak voltage
up to 1500 V. Furthermore, this op-
tocoupler has guaranteed Pulse
Width Distortion and Propagation
Delay Difference specifications that
allow the circuit designer to reduce
switching dead time and improve
inverter efficiency.
Performance of Optocoupler
• Minimum 15 kV/ µs transient
immunity
• Maximum propagation delay:
500 ns
• Maximum propagation delay dif-
ference between any two HCPL-
4506s: 450 ns
• Specification guaranteed over
-40°C to 100°C operating temper-
ature range.
Benefits
• World wide regulatory approval.
• Reduced deadtime
Alternative Avago Parts
1) HCNW4506 widebody, V
IORM
=
1414 V, HCPL-J456, V
IORM
= 891 V,
HCPL-0456, SO8 package.
2) HCPL-4504, CNW4504, HCPL-
J454, HCPL-0454.
3) HCPL-4503, HCNW4503, HCPL-
0453.
1
2
SHIELD
SHIELD
8
7
6
5
3
4
HCPL-4506
0.1 µF 20 K Ω
20 K Ω
20 K Ω
310 Ω
310 Ω
20 k Ω
1
2
8
7
6
5
3
4
HCPL-4506
0.1 µF
HCPL-4506
HCPL-4506
HCPL-4506
HCPL-4506
+5 V
+5 V
CMOS
CMOS
V CC1
I LED1
I LED2
V OUT1
V OUT2
V CC2
M
+HV
–HV
Q1
Q2
HCPL-4506
IPM