Avago Technologies Syncro 9361-8i - Manual (Page 25)

Avago Technologies
- 25 -
Syncro CS 9361-8i and Syncro CS 9380-8e Controllers User Guide
November 2014 Chapter 2: Hardware and Software Setup
Syncro CS 9380-8e Two-Server Cluster Hardware Setup
7. Perform the following steps to attach the CVPM02 module to the clip.
a. Ground yourself, and make sure that the system is grounded.
b. Remove the CVPM02 module from the package.
c. Place the CVPM02 module front-side-up on a flat, clean, static-free surface.
d. Press the CVPM02 module into the clip until the module clicks firmly into place, as shown in the following
figure.
Figure 12 Attaching the CVPM02 Module to the Clip
A
CacheVault
Power Module
Clip
3_01275b-00