Avago Technologies Syncro 9361-8i - Manual (Page 13)

Avago Technologies
- 13 -
Syncro CS 9361-8i and Syncro CS 9380-8e Controllers User Guide
November 2014 Chapter 2: Hardware and Software Setup
Syncro CS 9361-8i Cluster-in-a-Box Hardware Setup
J6B1 Advanced software options hardware key
header 3-pin header
Enables support for selected advanced features, such as Recovery,
FastPath, and SafeStore™ disk encryption.
Refer to the MegaRAID Advanced Software Options Hardware Key
Quick Installation Guide for more information.
J6B2 Default Serial boot ROM (SBR) header 2-pin connector
Reserved for LSI use.
J6B3 Global hard disk drive (HDD) activity LED
header 2-pin connector
Connects to an LED that indicates activity on the drives connected
to the
controller.
J6B4 On-board Serial Universal Asynchronous
Receiver/Transmitter (UART) connector 4-pin connector
Reserved for LSI use.
J6B5 Global drive fault LED header 2-pin connector
Connects to an LED that indicates whether a drive is in a fault
condition
J6B6 Complex programmable logic device (CPLD)
header 6-pin connector
Reserved for LSI use.
J6B7 Cache write pending header 2-pin connector.
Connector for an LED mounted on the system enclosure. The LED
indicates that the data in the cache has yet to be written to the
storage
devices.
Table 1 Syncro CS 9361-8i Controller Jumpers and Connectors (Continued)
Jumper/
Connector
Type Description
B
-%
YH YH
D N
B
-%
YH YH
D N
B
-%
YH YH
D N