KEPCO RA 19-1U Operator Manual - Manual (Page 12)

1-4
RA 19-1U 020413
FIGURE 1-5. MECHANICAL OUTLINE DRAWING, RA 19-1U RACK ADAPTER (SHEET 1 OF 2)
0.243 [6.2]
0.453 [11.5] 0.641 [16.3]
19.000 [482.6]
0.830 [21.1]
0.031 [0.8]
3.037 [77.1]
0.438 [11.1]
1.218 [30.9]
4.665 [118.5]
12.225 [310.5]
0.247 [6.3]
1.130 [28.7]
0.250 [6.4]
0.582 [14.8]
3.840 [97.5]
0.250 [6.4]
1.877 [47.7]
0.812 [20.6]
0.250 [6.4]
1.465 [37.2]
0.812 [20.6]
4.016 [102.0]
0.511 [13.0]
NOTES:
1. MATERIAL:
-CHASSIS,COVER,BACKPLATE 0.064" THK ALUM. 5052-H32
-PCB 0.063" THK. FR-4
2. FINISH
-IRIDITE GOLD ON ALL METAL PARTS.
-BACKPLATE SILKSCREEN BLACK INK.
3. IF KEYING IS REQUIRED USE THE INCLUDED SELF FORMING SCREWS 4-40x3/4" (1010480) AS PER FIGURE 2-1.
MAX. TORQUE 5 lbxin (0.6 Nxm).
4. MODULE ARE SECURED FOR HOT SWAP OPERATION WITH CAPTIVE PANEL SCREWS 4-40.
MAX. TORQUE 2 lbxin (0.23 Nxm).
5. FOR SHIPPING OR HIGH VIBRATION AND SHOCK ENVIRONMENTS,MODULES CAN EACH BE SECURED
WITH ONE FLAT HEAD SCREW 100~ , 6-32x1/4" MIN. to 1/2" MAX. LONG.(KEPCO P/N 1010408 ) OR SIMILAR.
THE SCREW WILL BE INSTALLED THRU THE COUNTERSUNK HOLES IN THE BOTTOM PAN.
0.250 [6.4]
0.311 [7.9]
0.250 [6.4]
0.444 [11.3]
1.735 [44.1]
1.250 [31.8]
0.250 [6.4]
3010247
1.218 [30.9]
1.166 [29.6]
1.009 [25.6]
0.812 [20.6]
0.582 [14.8]
0.527
[13.4]
1.106
[28.1]
1.166 [29.6]
6. DIMENSIONS ARE IN INCHES [DIMENSIONS IN BRACKETS ARE IN MILLIMETERS].
7. TOLERANCES (UNLESS OTHERWISE SPECIFIED): 3 PLACES: ±0.005, 2 PLACES ±0.01, FRACTIONS: ±1/64"