KEPCO RA 19-1U Operator Manual - Manual (Page 11)

RA 19-1U 020413
1-3
1.7 ACCESSORIES
Accessories for RA 19-1U Rack Adapters are listed in Table 1-2; see also Table 2-1 for addi-
tional accessories supplied with the unit.
1.8 OPTIONS
Table 1-1 below describes the standard model options available with the RA 19-1U rack
adapter. For non-standard options, contact Kepco Applications Engineering for assistance.
FIGURE 1-4. RA 19-1U RACK ADAPTER REAR PANEL
TABLE 1-1. COMPATIBLE 1U HSF POWER SUPPLIES
RA 19-1U RACK ADAPTER SLOT COMPATIBLE POWER SUPPLIES
1, 2, 3, 4 HSF-1UR 50W, 100W and 150W Series
HSF-1U 50W and 100W Series
NOTES: 1. Contact Kepco Applications Engineering for assistance with non-standard configurations.
2. RA 19-1U is compatible with HSF-1U, -1UR, -1URC, -1URX, and -1URY models.
TABLE 1-2. RA 19-1U ACCESSORIES
ACCESSORY PART NUMBER USE
Screw, Thread forming
(4-40, 0.75 in. long, PHPH)
101-0480
Module Keying. eight (8) supplied with unit. Installed by user (see PAR.
2.3).
Cable Clamp, Nylon, with
release lever
108-0422
Support weight of AC input and DC output cables. Four (4) supplied
with unit to be installed by user as desired (see Figure 1-4)
Line cord 118-0506
Supply 115 V a-c source power to rack adapter. Two (2) supplied with
unit.
Connector 142-0449 Mating Connector for I/O connector. Two (2) supplied with unit.
Filler Panel (1/4 Rack) RFP 19-1U-14 Cover one unused 1/4 rack slot.
Filler Panel (1/2 Rack) RFP 19-1U-12 Cover two unused 1/4 rack slots.
3042498
SOURCE POWER
INPUT FOR
PS2 AND PS4 I/O CONNECTOR,
PS3, PS4 I/O CONNECTOR,
PS1, PS2
PS4 KEYING
DIP 4
DC OUTPUT
PS3, PS4 DIP 3 DIP 2
SOURCE POWER
INPUT FOR
PS1 AND PS3
DIP 1
DC OUTPUT
PS1, PS2
PS3 KEYING PS2 KEYING PS1 KEYING
CABLE CLAMP*
AC INPUT
PS2 AND PS4
CABLE CLAMP*
DC OUTPUT
PS2 AND PS4
CABLE CLAMP*
AC INPUT
PS1 AND PS3 CABLE CLAMP*
DC OUTPUT
PS1 AND PS2
* CABLE CLAMPS ARE USER
INSTALLED.