Kyocera Ecosys m2040dn - Manual (Page 284)

8-38
Setup and Registration (System Menu) > System Menu
Adjust/Maint.
[System Menu/Counter] key > [▲] [▼] key > [Adjust/Maint.] > [OK] key
Adjust printing quality and conduct machine maintenance.
Item Description
Copy Denst. Adj. Adjust copy density.
Value : -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Send/Box Density Adjust scan density when sending or storing the data in Document Box.
Value : -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Contrast (Copy) Increases or decreases the overall contrast of copies.
Value : -3, -2, -1, 0, 1, 2, 3
Contrast (Send) Increases or decreases the overall contrast when documents are sent or saved in a document
box.
Value : -3, -2, -1, 0, 1, 2, 3
Background Density Darkens or lightens overall background density adjustment.
Copy (Auto) Darkens or lightens overall background density adjustment during copying.
Value : -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Send/Box (Auto) Darkens or lightens overall background density when sending images or storing them in the
Document Box.
Value : -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Print Density Adjust print density. Adjustment can be made in 5 levels.
Value : 1 (Lighter) to 5 (Darker)
AutoColorCorrect This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white during Auto Color Mode. Setting a lower value will result
in more originals being identified as color, while a larger value will tend to increase the number
of originals being identified as black and white.
Value : 1 to 5
Correct. Bk Line Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value : Off, On
Service Setting Settings for machine maintenance and inspection. This menu is primarily used by service
technicians to perform maintenance.