Configuring settings before sending, Using fax server to send a fax, X server – Kyocera Ecosys m2040dn User Manual
Page 185: Using fax server to send a fax (fax server, Transmission) -25
5-25
Operation on the Machine > Using fax server to send a fax (fax server transmission)
Using fax server to send a fax
(fax server transmission)
You can send a scanned document through a fax server.
Configuring Settings before Sending
Before sending a fax, the following setting is required.
• Configure the fax server settings.
FAX Server Settings (page 8-18)
Command Center RX User Guide
Using fax server to send a fax
1
Select the [Send] key.
2
Place the originals.
Place the originals.
3
[▲] [▼] key > [FAX Server] > [OK] key
NOTE
To use this function, you must have a fax server. For information on your fax server, ask your administrator.
This manual is related to the following products: