File format, File format -24, Format – Kyocera Ecosys m2040dn User Manual
Page 224: Specify the image file format. image quality level, Can also be adjusted
6-24
Using Various Functions > Functions
File Format
Specify the image file format. Image quality level can also be adjusted.
Select the file format from [PDF], [TIFF], [JPEG], [XPS], [OpenXPS], and [High Comp. PDF].
When the color mode in scanning has been selected for Grayscale or Full Color, set the image quality.
If you selected [PDF] or [High Comp. PDF], you can specify encryption or PDF/A settings.
Item
Value
Description
―
Select the [OK] key to save or send a PDF file. The image quality and
PDF/A settings will be the default settings.
For the default settings, refer to the following:
Image Quality
1 Low(High Comp) to
5 High(Low Comp)
Select [Detail] to display the [Image Quality] screen.
Select the image quality and select the [OK] key.
Encryption
Off, On
Set the PDF encryption and then select the [OK] key.
If [On] is selected, refer to the following:
PDF Encryption Functions (page 6-26)
PDF/A
Off, PDF/A-1a, PDF/A-1b
Select PDF/A-1 format type and select the [OK] key.
TIFF
―
Select the [OK] key to save or send a TIFF file. The Image Quality
settings will be the default values.
For the default settings, refer to the following:
Image Quality
1 Low(High Comp) to
5 High(Low Comp)
Select [Detail] to display the [Image Quality] screen.
Select the image quality and select the [OK] key.
XPS
―
Select the [OK] key to save or send a XPS file. The Image Quality
settings will be the default values.
For the default settings, refer to the following:
Image Quality
1 Low(High Comp) to
5 High(Low Comp)
Select [Detail] to display the [Image Quality] screen.
Select the image quality and select the [OK] key.
OpenXPS
―
Select the [OK] key to save or send a OpenXPS file. The Image Quality
settings will be the default values.
For the default settings, refer to the following:
Image Quality
1 Low(High Comp) to
5 High(Low Comp)
Select [Detail] to display the [Image Quality] screen.
Select the image quality and select the [OK] key.
Send
Scan to
USB