Kyocera Command Center RX - Manual (Page 99)

Management Settings
User Guide 95
Login User Name
When selecting Network Authentication from Authentication drop-down list,
enter the login user name to access the authentication server.
Login Password
When selecting Network Authentication from Authentication drop-down list,
enter the login password to access the authentication server.
Domain
When selecting Network Authentication from Authentication drop-down list,
select the domain from the drop-down list.
18.
Click Submit button, and then Back button.
Local User List
The user information can be added or modified on the local user list.
Add User
This adds a new user. Up to 1000 users can be registered.
1.
Click Add User icon. The New User - Property page opens.
2.
You can configure settings for User Property. This section includes the following items
for configuration:
User Name
Enter the name displayed on the user list (up to 32 characters).
Login User Name
Enter the user ID to log in (up to 64 characters). You cannot duplicate a login user
name to register.
Password
Enter the password to log in (up to 64 characters).
Confirm Password
To confirm the password, enter the same password that was entered in Password.
Access Level
Select either Administrator or User for privilege.
Account Name
From the drop-down list that is displayed by clicking Account List button, select an
account name followed by Submit button.
E-mail Address
Add a user's e-mail address. To enable sending e-mail, add your e-mail address.
The e-mail address will be automatically selected whenever an e-mail notice is
required by functionality.