Kyocera Command Center RX - Manual (Page 109)

Management Settings
User Guide 105
3.
Click Submit button. To cancel settings, click Back button.
Stamp Default Settings
1.
Click System Stamp under Management Settings on the navigation menu. The
System Stamp Settings page opens.
2.
To change the stamp default settings, click Settings button in Default Settings.
1. Text Stamp: Add or delete the text stamp as follows.
Text 1 (to 10): Enter the text for text stamp. To remove the text stamp, delete the
text in Text 1 (to 10).
2. Font Size: Enter the following font size.
Page #: Enter Font Size 1 (to 3) for page number in range of 6.0 to 64.0 pt as nec-
essary.
Text Stamp: Enter Font Size 1 (to 3) for text stamp in range of 6.0 to 64.0 pt as
necessary.
Bates Stamp: Enter Font Size 1 (to 3) for bates stamp in range of 6.0 to 64.0 pt as
necessary.
3.
Click Submit button. To cancel settings, click Back button.
Message Board
This section provides information on how to configure the message board that is shown
on the machine’s operation panel of the embedded web server.
Settings
To enable the message board, you must first make settings for the message board.
1.
Click Message Board under Management Settings on the navigation menu. The
Settings page opens.
2.
Click Settings button.
3.
To enable the message board, select On and click Submit button. To cancel settings,
click Back button.
Adding a Message List
1.
Click Add icon. The New Message - Property page opens.
2.
You can configure settings for property. This section includes the following items for
configuration:
Device to Show
Add Operation Panel and/or Command Center RX.
Place to Show
You can add Home and/or Login Screen.
Message Type
Select a type of message from Normal, Alert, and Prohibition on the drop-down
list.