Kyocera Command Center RX - Manual (Page 83)

Security Settings
User Guide 79
9 Security Settings
This page is accessible when you have logged in the embedded server with
administrator privilege, while network authentication or local authentication is enabled.
If needed, make the following settings: See below for detailed information.
• Device Security
• Send Security
• Network Security
• Certificates
Device Security
This section includes settings for device security.
Interface Block
This page allows you to restrict access from each interface.
1.
Click Device Security under Security Settings on the navigation menu. The Device
Security Settings page opens.
2.
This section includes the following items for configuration.
Network
Access from the network interface cannot be restricted. Access should be restricted
depending on the protocol. For more details, see the Protocol Settings page under
Network Settings.
USB Device
To block accesses from the devices connected to the USB port, select Block.
USB Host
To block accesses from the USB host devices, select Block.
USB Storage
To block accesses from the storages connected to the USB port, select Block.
Parallel I/F
To block accesses from the parallel interface, select Block.
Option Interface 1
To block accesses from the Option 1 interface, select Block.
Option Interface 2
To block accesses from the Option 2 interface, select Block.
3.
Click Submit button.