Kyocera Command Center RX - Manual (Page 59)

Function Settings
User Guide 55
General
Configure the general information on the rule.
1. Rule Number: Enter the rule number from 001 to 100.
2. Rule Name: Enter the rule name.
3. Priority: Select the priority of the rule from the drop-down list.
Rule Settings
Configure the rule settings.
1. Rule Type: Select FAX Sub Address, FAX Number, Reception Port or i-FAX
Address.
2. Sub Address: Displays when you select FAX Sub Address as Rule Type. Enter
the sub address.
3. FAX Number: Displays when you select FAX Number as Rule Type. After
selecting rule, enter the fax number.
4. Reception Port: Displays when you select Reception Port as Rule Type. Select
Port 1 or Port 2.
5. i-FAX Address: Displays when you select i-FAX Address as Rule Type. After
selecting rule, enter the i-FAX address.
Schedule
Configure the schedule for the specified rule.
1. Schedule: Select All Day or Preset Time.
2. Start Time, End Time: You can configure the setting when you select Preset Time
as Schedule. Specify the time table from the drop-down list.
File Name
Configure the file name created when forwarding.
1. File Name: Enter the file name.
2. Additional Information: Select the additional information on the file name from
the drop-down list.
Forward Settings
Configure the forward destination.Select the destination on the list, and then click
the Delete icon.
1. Forwarding: Select On and click the desired address button to specify the
forwarding destination.
2. Address Book: Click Address Book button to open the Addresses page. Select
the desired Address Book and click Submit button.
3. E-mail: Click E-mail button to open the E-mail page. Enter E-mail Address and E-
mail Address (Confirmation), and then click Submit button.
4. Folder: Click Folder button to open the Folder page.
Protocol: Select SMB or FTP.
Host Name: Enter the host name. If you use the host name, you must first specify
the DNS server information.
Port Number: Enter the port number from 1 to 65535.
Path: Enter the path of the folder.
Login User Name: Enter the login user name.
Login Password: Enter the login password.
Connection Test: ClickTest button to confirm the connection to the folder.
5. FAX: Click FAX button to open the FAX page.
FAX Number: Enter the fax number.
Sub Address: Enter the sub address.
Password: Enter the password for the sub address.
TX Start Speed: Select 33600 bps, 14400 bps, or 9600 bps.
ECM: Select On to use ECM communication.