Kyocera Command Center RX - Manual (Page 62)

Function Settings
58 Embedded Web Server
Function Key 1
The copy function is assigned as a default setting. You can register the other func-
tion on this key.
Function Key 2
The send function is assigned as a default setting. You can register the other func-
tion on this key.
Function Key 3
The fax function (option) is assigned as a default setting. You can register the other
function on this key.
Note: Some machine products appears Copy Function, Send Function, and FAX
Function respectively as a default setting instead of Function Key 1 (to 3) . You
can enable or disable the each key on the machine.
Copy Function
You can enable or disable the Copy key on the machine.
Sending Function
You can enable or disable the Send key on the machine.
FAX Function
You can enable or disable the Fax key on the machine.
3.
Click Submit button.
Home
1.
Click Operation Panel under Function Settings on the navigation menu. The
Customize Operation Panel page opens.
2.
This section includes the following items for configuration.
Customize Desktop
Click Add function, Add Program, then Add Application button, and add an item.
Up to 8 items can be added per screen, 40 in total. Click Submit button to finalize
settings. Click Delete icon to delete the items that are not needed. Up and Down
button allow to interchange the items in order.
Customize Taskbar
Specifies the items to show in the task bar. Activate and deactivate each of Status/
Job Cancel, Device Information, Language, Paper Settings, Wi-Fi Direct, Sys-
tem Menu, Favorites, Help, Program, Accessibility Screen, and Message
Board.
Note: The supported value will change accrding to the model type.
Background
Allows you to change the background image of the Home screen. Select an image
from the Picture 1 to Picture 8 on the drop-down list.
3.
Click Submit button.