Subaru Robin EX13 - Manual (Page 92)

- 3 -
3. DISASSEMBLY AND REASSEMBLY
3-1 PREPARATIONS AND PRECAUTIONS
(1) When disassembling the engine, memorize the location of each part so that you can
reassemble the engine correctly . If necessary, attach identification tags with the required
assembly information to the parts .
(2) Store groups of parts in separate boxes . This will make reassembly easier .
(3) To prevent parts from being mislaid, keep each group provisionally assembled after
removing the parts from the engine .
(4) Handle the disassembled parts with the utmost care . Clean them with cleaning oil if
necessary .
(5) Use the correct tools in the correct way when disassembling and reassembling the engine .
3-2 SPECIAL TOOLS
Description Parts number
Flywheel puller for pulling off the flywheel
FLYWHEEL PULLER
Commercially available product
Dwyer #490-1 Wet
Wet handheld manometer
XXXXXXXX
Throttle body
Computer data cable with 9 volt battery
308802006
Diagnostic EFI Compact Disc XXXXXXXX
Desktop or laptop computer RS232 9-pin COM port on computer