TA Triumph-Adler P-4035 MFP - Manual (Page 49)

3-10
Sending Faxes > Basic transmission procedure
Cancelling Transmission (during communication)
Follow this procedure to break the connection and stop transmission/reception.
1
Press the [ Status/Job Cancel ] key.
2
Disconnection of communication.
1 Press the [ ▲ ] or [ ▼ ] key to select [FAX].
2 Press the [ OK ] key.
3 Check the status of communication.
4 Press [Line Off]. When communication is disconnected, transmission stops.
To cancel direct transmission, refer to Cancelling Direct Transmission on page 3-24 .
To cancel a delayed transmission or send a fax by immediate transmission, refer to Cancelling and
Sending Delayed Transmissions (Queued) on page 3-22 .
To cancel polling transmission, refer to Polling Communication on page 5-22 .
NOTE
To cancel direct transmission, delayed transmission, or polling transmission, refer to the
section for that function.
FAX:
Line Off
Ready.