Select transmission settings – TA Triumph-Adler P-4035 MFP User Manual
Page 29
2-16
Before Using the Fax Machine > Registering Destinations in the Address Book
3
Enter the fax number.
Enter the fax number of the receiving system using the numeric keys.
Up to 32 digits can be entered as the fax number of the receiving system.
Pressing the [
Address Recall/Pause
] key adds about three seconds of waiting time during
dialing. For example, when dialing the receiving system on an external line, you can use this
method to insert a pause before resuming dialing after you dial a specific number.
6
Select transmission settings.
Sub address communication, encrypted transmission, transmission start speed and ECM can
be set.
1
Press [Detail].
2
Press [
] or [
] to select the item to change the settings for and then press [Edit] or
[Change].
3
Press the [
OK
] key.
Item
Description
Sub Address
Set this to transmit using a Sub Address. For details, refer to
.
Encrypted TX
This is set when using encrypted transmission to send the data. For details, refer
to
Using the Encrypted Transmission on page 5-32
.
TX Start Speed
This is set to change the transmission start speed. Select the speed from 33,600
bps, 14,400 bps, and 9,600 bps.
NOTE
Normally the default setting should be used.
ECM
ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax
machines that have ECM mode check for errors as they communicate,
preventing distortion of the image due to noise on the line and other conditions.
FAX No. Entry:
Detail
0123456789
FAX No. Entry:
Detail
0123456789
FAX Detail:
1/ 6
Sub Address:
Edit
1234567890