TA Triumph-Adler P-4035 MFP - Manual (Page 170)

8-6
Fax Settings > Default fax settings
Reception
Item Description
FAX Media Type Specify the paper type to be used for print output of the received fax.
Value : All Media Type, Plain, Rough, Vellum, Labels, Recycled, Bond, Cardstock, Color,
Envelope, Thick, High Quality, Custom 1-8
Refer to FAX Media Type on page 4-7 .
Rings(Normal) If the reception method is fax automatic reception, the number of rings until the machine
answers a call can be changed as needed.
NOTE
This setting does not appear in some regions.
Rings(TAD) If the reception method is FAX/Answering Machine Auto Switch Reception, the number of rings
until the machine answers a call can be changed as needed.
NOTE
This setting does not appear in some regions.
Rings(FAX/TEL) If the reception method is FAX/TEL Auto Switch Reception, the number of rings until the
machine answers a call can be changed as needed.
NOTE
This setting does not appear in some regions.
Forward Settings Configure Forward Settings.
Refer to Forward Settings on page 5-2 .
RX Settings Select the reception mode.
Value: Auto(Normal), Auto(FAX/TEL), Auto(TAD), Auto(DRD), Manual
If Auto (DRD) is selected, select the DRD Pattern.
Value : Pattern 1 (Normal Ring), Pattern 2 (Double Ring), Pattern 3 (Short-Short-Long), Pattern
4 (Short-Long-Short)
DRD reception mode is available for some countries.
For details, refer to DRD Reception (Available for inch versions only) on page 5-40 .
RX Date/Time Reception Date/Time function adds the reception date/time, sender information and number of
pages on the top of each page when the message is printed out. It is useful for confirming the
time of reception if the fax is from a different time zone.
Value : On, Off
For details, refer to RX Date/Time on page 4-8 .
2 in 1 Printing When you receive a multi-page Statement or A5 size original, this function prints 2 pages of the
original at a time on one Letter or A4 size sheet of paper.
Value : On, Off
For details, refer to 2 in 1 Printing on page 4-8 .
Batch Print When a multi-page fax is received, the pages are printed in a batch after all pages are received.
If [Off] is set, each page is printed as it is received.
Value : On, Off
For details, refer to Batch Print on page 4-8 .
Remote SW Dial To start fax reception by operation from the connected telephone set, use the following operation.
Value : 00 - 99
For details, refer to Remote Switch Function on page 5-43 .
Encryption RX Turns on reception by encrypted communication.
Value : On, Off
If turned on, select the encryption key.
For details, refer to Encryption on page 5-30 .