Connecting cables, Connecting lan cable, Connecting cables -8 – TA Triumph-Adler 3005ci User Manual
Page 66: Connecting lan cable -8

2-8
Installing and Setting up the Machine > Connecting Cables
Connecting Cables
Connecting LAN Cable
1
Connect the machine.
1
Connect the LAN cable to the network interface connector.
2
Connect the other end of the cable to the hub.
2
Set up the machine.
Power on the machine and configure the network.
IMPORTANT
If the power is on, turn the main power switch off.
For details, refer to
Network Setup (LAN Cable Connection) on page 2-25
.