TA Triumph-Adler 3005ci User Manual
Page 478
10-30
Troubleshooting > Troubleshooting
P
R
Message
Checkpoints
Corrective Actions
Reference
Page
Paper jam.
―
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the screen.
Leave the machine on and follow
the instructions to remove the
jammed paper.
Paper left.
—
Remove paper from the document
finisher.
—
Performing Drum
Refresh…
—
The machine is under the
adjustment to maintain its quality.
Please wait.
—
Perform Tone Curve
Adjustment in the
System Menu.
Over long periods of use, the effects
of the ambient temperature and
humidity can cause color output
hues to vary slightly.
Run [Tone Curve Adjustment].
Preparing to print.
—
The machine is under the
adjustment to maintain its quality.
Please wait.
—
Printing System error.
—
An error has occurred on Printing
System.
Refer to Responding to Printing
System Error for the error code and
corrective actions.
Printing System error.
Press Status/Job Cancel
key to check error.
Press [
Status/Job Cancel
] key.
Is the [Printing System Error.]
message displayed?
An error has occurred on Printing
System. Refer to Responding to
Printing System Error for the error
code and corrective actions.
Press [
Status/Job Cancel
] key.
Is the [Device/Communication]
screen displayed?
An error has occurred on Printing
System. Press [Printing Sys Err] of
the [Device/Communication] screen
and check error.
Message
Checkpoints
Corrective Actions
Reference
Page
Regulating the
temperature…
―
The machine is under the
adjustment to maintain its quality.
Please wait.
―
Removable memory
error.
*
Is writing to a removable memory
prohibited?
An error occurred in the removable
memory. The job stopped. Press
[End].
The possible error codes and their
descriptions are as follows.
01: Connect a removable memory
that can be written to.
―