TA Triumph-Adler 3005ci - Manual (Page 200)

5-24
Operation on the Machine > Copying
Interrupt Copy
This function allows you to pause the current jobs in progress when you need to make copies immediately.
When the interruption copy ends, the machine resumes the paused print jobs.
1 Configure the settings.
1 Press the [ Interrupt ] key.
The current print job is temporarily interrupted.
2 Place the originals onto the machine for interrupt copy, and configure the copy settings.
2 Press the [ Start ] key.
Interrupt copying begins.
3 When interrupt copying ends, press the [ Interrupt ] key.
The machine resumes the paused print jobs.
NOTE
• If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically cancelled and
printing resumes.
You can change the delay until interrupt copying is canceled. Change the delay as required.
Interrupt Clear Timer (page 8-55)
• The interrupt copy function may be unavailable depending on the status of document finisher usage. In this case, try
the priority override.
Priority Override (page 6-61)
Copy Image
Preview
Copies
Color/
Image Quality
Org./Paper/
Finishing
Quick Setup Layout/Edit Advanced
Setup
Shortcut 1
Shortcut 4
Shortcut 3
Shortcut 2
Shortcut 6
Shortcut 5
Original
Zoom
Paper
100%
---
:
:
:
---
Place original.
Program
100%
A4
A4
Preview
Original
Zoom
Paper
:
:
:
Normal 0 Auto 100%
Off 1-sided
>>1-sided Off
Paper
Selection
Staple
/Punch
㪛㪼㫅㫊㫀㫋㫐 㪱㫆㫆㫄
㪛㫌㫇㫃㪼㫏 㪚㫆㫄㪹㫀㫅㪼
Preview