TA Triumph-Adler 3005ci - Manual (Page 391)

8-45
Setup and Registration (System Menu) > System Menu
Protocol Settings
Item Description
SMTP (E-mail TX) Select whether to send E-mail using SMTP.
Value : Off, On
POP3 (E-mail RX) Select whether to receive E-mail using POP3.
Value : Off, On
FTP Client (Transmission) Select whether to send documents using FTP. When selecting [On], set the FTP Port Number.
Use the default port 21.
Value : Off, On (Port Number: 1 to 65535)
FTP Server (Reception) Select whether to receive documents using FTP. *1
Value : Off, On
SMB Client (Transmission): Select whether to send documents using SMB. When selecting [On], set the SMB Port
Number. Use the default port 139.
Value : Off, On (Port Number: 1 to 65535)
NetBEUI Selects whether to receive documents using NetBEUI. *1
Value : Off, On
WSD Scan Select whether to use WSD Scan. *1
Value : Off, On
WSD Print Select whether to use WSD Print. *1
Value : Off, On
i-FAX Select whether to use i-FAX.
Value : Off, On
NOTE
This function is displayed when the optional Internet FAX Kit is activated.
DSM Scan Select whether to use DSM scan.
Value : Off, On
ThinPrint Select whether to use ThinPrint. When selecting [On], set the SMB default Port Number. Use
the default port 4000.
*1, *2
Value : Off, On (Port Number: 1 to 32767)
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
Thin Print over SSL To use Thin Print over SSL, press [Thin Print over SSL] and select [On].
Value : Off, On
NOTE
When selecting [On], the certificates must be installed. For details, refer to the Embedded Web
Server RX User Guide.
LPD Selects whether to receive documents using LPD.
*1
Value : Off, On
Raw Select whether to receive documents using Raw Port. *1
Value : Off, On
IPP Selects whether to receive documents using IPP. When selecting [On], set the IPP Port
Number. Use the default port 631.
*1, *2
Value : Off, On
IPP over SSL Selects whether to receive documents using IPP over SSL. When selecting [On], set the IPP
default Port Number. Use the default port 443.
*1, *2
Value : Off, On (Port Number: 1 to 32767)
NOTE
When selecting [On], the certificates must be installed. For details, refer to the Embedded Web
Server RX User Guide.