TA Triumph-Adler CX 8036 - Manual (Page 75)

Section 3 Scan Mode 3-7
This will allow the automatic width detection system to determine the image width when an
original is placed in the scanner.
(Eng) Engineering widths = 34, 22, 17, 11, and 8.5 inches
(Arch) Architecture widths = 36, 30, 24, 18, 12, and 9 inches
2.2.2 Original
Type
There is a selection of four different predetermined original types. The selections are:
a) Line - used for simple line documents
b) Line / Photo - used for a combination of lines & photos documents
c) Greyscale - used for a combination of lines & areas of shade (CAD)
originals
d) Photo - used for photographic originals
Press the desired original setting from one of the four diagrams. This will allow automatic
image quality adjustments for the next scan. Please note that the selection will be
highlighted with a “black” circle and the icon will become white, as in the above example
“Greyscale”
2.3 Original Size
This region is used to select the image size to be scanned.
2.3.1 Automatic
Size
For most scans, “Automatic” should be selected. This will allow the scanner to
automatically determine the width and length of the scan without any user intervention
( please also note “Original Size Mode” in 2.2 )