TA Triumph-Adler CX 8036 - Manual (Page 71)

Section 3 Scan Mode 3-3
1.2 Simple Scanning
To scan to file please follow these basic steps.
The following chapters have details on adjustments and parameters that the user can
change to modify the scans.
1.2.1 Select
Scan Mode
On the lower region of the Operator Panel select “SCAN”.
1.2.2 Select Size Mode
Select whether your document is an engineering or architectural size document. This will
allow automatic width detection to function.
Engineering widths = 34, 22, 17, 11, and 8.5 inches
Architecture widths = 36, 30, 24, 18, 12, and 9 inches