TA Triumph-Adler CX 8036 - Manual (Page 40)

Section 1 Basic Printer Functions 1-34
3. 2 Call Service Errors
If the machine has the fatal error you will note one of the following Error Codes on the Technical
LCD panel. It is impossible for the user to resolve these errors.
PLEASE CONTACT YOUR AUTHERIZED SERVICE PERSONNEL
TO RESOLVE THESE ERRORS.
Code Error
E - 000 Fuser Low Temp
E - 001 Fuser Over Temp
E - 002 Fuser Low Temp
E - 003 Temp Not Rise
E - 010 Motor1 Error
E - 011 Motor2 Error
E - 012 Motor3 Error
E - 020 Counter Error
E - 031 1st Error
E - 032 AC Error
E - 033 Tr Error
E - 034 Bias Error
E - 040 Cutter Error
E - 050 FPGA Error
E - 070 Dev Error
If any of the above errors is displayed:
1. Turn off the printer, wait approximately one minute, and turn the printer on again.
2. If the same error code is displayed, turn off the printer, and then unplug the printer from the
wall outlet.
3. Contact your Authorized Service Company.