TA Triumph-Adler CX 8036 - Manual (Page 174)

Section 8 Request 8-18
2.5.3.2 Scheme – Allows a predetermine
scheme (group of settings) to be applied to the files
for printing. The creation or deletion of zoom/media
schemes is also preformed here.
2.5.3.3
Enlarge / Reduce – Select from
predetermined zoom ratios with the drop down or
enter a custom value in this field
2.5.3.4 Roll
Size – Select The roll width to be printed on. Please note that
this width must be installed into the printer for the job to
commence printing . Please see the Printer Info at the
bottom of the main screen to confirm the rolls installed.
2.5.3.5 Length – the length of the page can be entered rather than using the
automatic length of the zoom file. Please also not that a value
of “0” will automatically cut the media to the length of the
image to avoid any waste.
2.5.3.6 Rotation – All prints are automatically rotated to best fit the installed
media. This can be changed to allow custom rotation of
the image on the page configured in this screen.
Degrees include 90, 180 and 270.
2.5.3.7 Ignore Force Size…. – If the image is
smaller than the selected paper size, no zoom ratio will
be applied to the image if this button is selected.
2.5.3.8 Nest – to avoid wasting media and at
times to increase print production, two images can
be set side by side on a single page of media. ( nest
the images.)
2.5.3.9 Margins – If so desires the image can
be positioned on the page using these fields.