TA Triumph-Adler CX 8036 - Manual (Page 177)

Section 8 Request 8-21
2.5.4.10
Graphic Placement – Pull down
Determines the placement of the graphic in relation to the
applied text. This is ignored if text is not applied.
2.5.4.11
Merge Type – Pull down
A. Opaque – Displays the stamp on top of the
image. The background of the stamp is white
and will obscure some image.
B. Transparent – Overlays the stamp on top of the image. The
background of the stamp is transparent.
C. Invert – Displays the stamp on top of the image. Colors are inverted
where the data intersects
2.5.4.12 Screening – Pull down
Allows the user to define the screen level ( shading ) of the
stamp using pre-set screening percentages.
2.5.4.13
Text Settings Area
Enter the text of the stamp. Add a Macro within the text if desired.
2.5.4.14
Macro – Pull down Menu
Choose a macro from the list to apply information at print time, such as Requester
name, time of day, etc.
2.5.4.15
Graphic Image Settings Area
Displays the path to your selected graphic image. The path is relative to the user’s
workstation.
NOTE:
1) The image file must also reside on the KIP IPS, it may be copied manually to the
same folder location on the IPS as the workstation.
2) Or you may apply the stamp to document with a file label called
“Savestamp.tif”. It will then automatically be copied from the workstation to the
KIP IPS.
2.6
2.5.4.16 Preview Stamp
Click to see the configured Stamp settings in the
viewer. Use CRTL+TAB to cycle through text and
image.