TA Triumph-Adler CX 8036 - Manual (Page 116)

5-22 Section 5 Help-Configuration
Print Configs
Allows the user to print all configuration files (.INI files) with the touch
of a button.
sleep when there’s no apparent printing that’s needed, or can set up time
for the printer to wake up. By default, the printer will start warming back
up anytime a Job / file arrives at a monitored path for printing. It will
resume cold sleep 15 minutes later.
Roll selection
Allows the user to print their documents on the closest size media loaded
in the machine, or to the ‘Exact size’ media. If the user has this option set
to exact, the job will not print out until the correct size media is loaded into
the machine.
Unattended delay
Allows the user to adjust the time interval (in seconds) in which the
Powerprint Controller will seek the monitor paths for files to be printed out.
Print Separator Sheet
Users can choose to print a separator
sheet between each job, or between
each set. This feature has been found to
be very useful for users of KIP folding and
finishing systems.
Roll info
Allows the user to override the media in a specific drawer of the printer, or
the printer can be set to automatically detect the media loaded into a
drawer.
Save
Allows the user to save changes made to the miscellaneous setup.
Cancel
Allows the user to exit the miscellaneous setup screen and return to the
configuration menu.