TA Triumph-Adler CX 8036 - Manual (Page 102)

5-8 Section 5 Help-Configuration
4.0 Configuration
4.1 Inch or Metric Units
Set the system from “Inch Mode” to “Metric Mode” by pressing the Inch or
Metric button. This will effect the entire System, including Scan,
Print and Copy. Please note that the printer must be set to the correct size
mode for proper print function.
4.2 Language
Set the Operator Panel into a desired language.
4.3 Energy Star Mode
The Copier is Energy Star compliant. It is defaulted to power off 30
minutes after last used.
4.4 Power Save Settings
The incorporates timers to save power and place the printer in
“cold sleep mode” to suit individual company production requirements.
These timers can be used to automatically turn off the printer when the
“office is closed”, for example overnight.
Energy Star Settings – Energy Star compliant settings require that the
printer goes to Warm Sleep after 15 minutes and into Cold Sleep after 90
minutes of inactivity. These are the factory setting and can be achieved
by selecting “Reset”.
There are two sleep mode settings to choose from, only one can be
active at a time and these are locked by default in the Services settings.
1. Warm/Cold Sleep Timers – This timer can be set to put the printer
into a warm/cold sleep mode after a predetermined period of
inactivity.
2. Sleep Time – This time is used in conjunction with the computers
clock and is used to put the Printer to sleep at a pre-set time and
wake the printer back up at a pre-set time.