TA Triumph-Adler FAX 720 - Manual (Page 25)

15
Introduction
1
2
3
5
Services 8
Options
Appendices
Telephoning
Directory
Settings
Fax
Printing
Settings (menu 2)
6
Doc control
4
7
@
Internet
9
TAD
Advanced
functions
1
80%(5 2) 5,1*6 )25 7+( $872 02'(
This function enables you to set the number of rings before the automatic activation of your telephone
answering device.
+
P RESS M, 2, 6, OK
+
Change the number of rings and press OK to confirm.
&
25'/(66 3+21(
The machine can be used together with one or more cordless phone sets, which require the installation
of the cordless phone kit supplied with your machine or available from your supplier. Please refer to the
instructions coming with the kit for more information. When fitted with this kit, your machine gives you
access to the functions described below.
5
(*,67(5,1* $ &25'/(66 3+21(
For each cordless phone you want to register on your machine:
+
P RESS M, 2, 7, 1, OK
+
On the cordless phone, press OK and 6 . A number specific to each handset appears on its display
screen.
'
( 5(*,67(5,1* $ &25'/(66 3+21(
+
P RESS M, 2, 7, 2, OK
The main unit’s screen displays the numbers for the registered handset.
+
Enter the number corresponding to the handset you want to de-register and press OK . Your
machine emits a series of beeps telling you that de-registration is in progress.
%
$6( 67$7,21 5(*,675$7,21 &2'(
+
P RESS M, 2, 7, 3, OK
This function enables you to define a 4-digit registration code intended to protect your base station, e.g.
from the registration of handset that do not belong to you but are in the same reception zone as your
machine.
3
527(&7,21 2) <285 0$&+,1(
3
527(&7,21 2) 92,&( 25 )$; 0(66$*(6
You can protect all your messages by a code, which you will have to enter prior to consulting them. To
do so, you have to set a message access lock and choose an access code other than 0000.
0HVVDJHDFFHVVORFN
+
P RESS M, 2, 8, 1, OK
+
Select the required option using the or key:
• WITHOUT : no access code for local access to the messages,
• WITH : local access to the messages is possible only after entering the access code.
+
Press OK to confirm.