TA Triumph-Adler P-C3560DN - Manual (Page 36)

2-7
Installing and Setting up the Machine > Connecting Cables
Connecting USB Cable
1 Connect the cable to the machine.
1 Connect the USB cable to the USB interface connector located on the left side of the body.
2 Connect the other end of the cable to the PC.
2 Power on the machine.
Connecting the Power Cable
1 Connect the cable to the machine.
Connect one end of the supplied power cable to the machine and the other end to a power
outlet.
IMPORTANT
If the power is on, turn the power switch off.
Power Off (page 2-8)
IMPORTANT
Only use the power cable that comes with the machine.