Network, Network -18, Configures machine system settings – TA Triumph-Adler P-C3560DN User Manual
Page 152: Tcp/ip settings
8-18
Setup and Registration (System Menu) > System Menu
Network
Configures machine system settings.
TCP/IP Settings
[Menu] key > [▲] [▼] key > [Network] > [OK] key > [▲] [▼] key > [TCP/IP Settings] > [OK] key
Configures TCP/IP settings.
Item
Description
TCP/IP
Set up TCP/IP to connect to the Windows network.
Value
: Off, On
IPv4 Setting
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to
[On].
DHCP
Select whether or not to use the DHCP (IPv4) server.
Value
: Off, On
Auto-IP
Select whether to use Auto-IP.
Value
: Off, On
IP Address
Set the IP addresses.
Value
: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Subnet Mask
Set the IP subnet masks.
Value
: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Default Gateway
Set the IP gateway addresses.
Value
: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Bonjour
Select whether or not to use Bonjour.
Value
: Off, On
IPv6 Setting
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On].
TCP/IP(IPv6)
Select whether or not to use IPv6.
Value
: Off, On
RA (Stateless)
Select whether to use RA (Stateless).
Value
: Off, On
NOTE
This setting is displayed when [TCP/IP (IPv6)] is set to [On].
DHCPv6
Select whether to use the DHCP (IPv6) server.
Value
: Off, On
NOTE
This setting is displayed when [TCP/IP (IPv6)] is set to [On].
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.