Basic, Wireless network – TA Triumph-Adler P-C3560DN User Manual
Page 154
8-20
Setup and Registration (System Menu) > System Menu
Basic
[Menu] key > [▲] [▼] key > [Optional Network] > [OK] key > [▲] [▼] key > [Basic] > [OK] key
Wireless Network
[Menu] key > [▲] [▼] key > [Optional Network] > [OK] key > [▲] [▼] key > [Wireless Network] > [OK] key
Item
Description
TCP/IP Settings
For details on setting value.
NetWare
Use NetWare to receive documents.
Value
: Off, On
AppleTalk
Selects whether to receive documents using AppleTalk.
Value
: Off, On
IPSec
Select whether to use IPSec.
Value
: Off, On
LAN Interface
Select the LAN Interface type.
*1
NOTE
Value
: Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T
This function is displayed when the optional Network Interface Kit is installed.
*1 The setting will be changed after restarting the device or network.
MACAddressFilter
Select whether to use MAC Address Filter.
Operation Guide for the optional Network Interface Kit
Value
: Off, On
Restart Network
Restarts the network card of the device.
NOTE
This function is displayed when the optional Wireless Network Interface Kit is installed.
Item
Description
ConnectionStatus
When the optional Wireless Network Interface Kit is installed, you can check the wireless LAN status.
Quick Setup
If the machine will connect to an access point that supports the automatic wireless network setup,
connection settings can be configured by Quick Setup.
AvailableNetwork
Displays access points to which the machine can connect.
Push Button
If the access point supports the push button method, wireless settings can be configured using
the push button. This setting executes push button, and the connection is started by pressing
the push button on the access point.
NOTE
The push button method supports only the WPS.
PIN (Device)
Starts connection using the machine's PIN code. Enter the PIN code into the access point. The
PIN code of the machine is automatically generated.
PIN (Terminal)
Starts connection using the PIN code of the access point. Enter the PIN code of the access point.