Rugged Cams ELX DVR 16 Channel - Manual (Page 62)

ELX16-240 Basic Configuration
62 2003.09.06 (v 1.0) Rugged CCTV.
5.7.8. Miscellaneous
- Press [MENU] button and select “Miscellaneous” below the “System ” tab. Remote Control ID Up to sixteen ELX16-240s can be controlled with a single IR Remote Control. Designate each unit with a unique number under the ‘Remote Control ID’ menu. When not using remote controller, set it as “Off”. - Aim remote controller at the ELX16 -240. - Press the “I D ” button of remote controller until ELX16-240 reacts. - If remote controller’s ID agrees with ELX16 -240’s, all the LEDs on the front panel of the ELX16-240 will light up and a buzzer will sound. - OSD menus can now be set with the remote controller. - For more information, please refer to “ ELX16-240 Installation Guide ”.
- Press [MENU] button and select “Miscellaneous” below the “System ” tab.
Remote Control ID
Up to sixteen ELX16-240s can be controlled with a single IR Remote Control. Designate each unit with a
unique number under the ‘Remote Control ID’ menu. When not using remote controller, set it as “Off”.
- Aim remote controller at the ELX16 -240.
- Press the “I D ” button of remote controller until ELX16-240 reacts.
- If remote controller’s ID agrees with ELX16 -240’s, all the LEDs on the front panel of the ELX16-240
will light up and a buzzer will sound.
- OSD menus can now be set with the remote controller.
- For more information, please refer to “ ELX16-240 Installation Guide ”.