Rugged Cams ELX DVR 16 Channel - Manual (Page 16)

ELX16-240 Basic Configuration
16 2003.09.06 (v 1.0) Rugged CCTV.
3.7.2. Controlling Zoom/Focus
To control Zoom and Focus during live image monitoring mode.
- Press the [SELECT] button. Move the “Select” icon to the desired channel.
- Press the [MENU] button.
- Select ‘Zoom/Focus’ from the PTZ Menu.
- Control zoom and focus functions using the up, down, le ft and right arrows of front panel.
3.7.3. Using Load Preset
To load preset for dome camera during live monitoring mode.
- Press the [SELECT] button. Move the “Select” icon to the desired channel.
- Press the [M ENU] button.
- Select ‘Load Preset ’ from the PTZ Menu.
- Press number button for desired preset on the front panel.
3.7.4. Using Save Preset
To set a new preset point for dome camera during live monitoring mode
- Move dome camera to the desired position using the ‘Pan /Tilt’ and ‘Zoom/Focus’ menus.
- Press the [SELECT] button.
- Press the [MENU] button.
- Select ‘Save Preset ’ from the PTZ Menu.
- Designate a number for the preset position by p ress ing a number button on the front panel.
3.8. Using Relay
To set relay on/off. (ELX16-240 supports four relay outputs.)
- Press the [ACK/RELAY] button.
- The icon of “Relay On ” shows on the screen.
- Press the relay number button between 1 and 4, and then the related relay out signal will be transmitted.
- In order to set relay off, press the [ACK/RELAY] button again.
- Then “Relay On ” shows because relay keeps being set as on.
- Press the [ACK/RELAY] button again, and then the icon of “Relay Off” will show.
- Press the relay a number button to set off.
3.9. Using Screen Lock
To set screen lock agaist unauthorized user ’s controlling when administrator isn’t on his deak.
- For this function, user password should be set at first.