Configuration – Rugged Cams ELX DVR 16 Channel User Manual
Page 26
ELX16-240
Basic Configuration
26
2003.09.06 (v 1.0)
Rugged CCTV.
5. Configuration
5.1. Quick Setup
There are three menus for recording setup; Quick Setup, Normal Recording, Alarm Recording menu
in Configuration Menu. Quick Setup is the easiest set-up, activating all eight analog cameras to record
with the same settings and conditions . Normal recording is the standard recording settings and can be
customized based on time and channel. Alarm recording is the recording schedule based on alarm
conditions (Motion Detection, Sensors, etc.) Also, Quick Setup has time setting menu.
5.1.1. Date/Time
When ELX16-240 is manufactured in factory, time zone will be set as “UTC 00:00 Dublin ”.
Set the time to local time zone.
Changing ELX16-240 time may cause time conflict with recorded images. In this case, it is strongly
recommended to re-format the hard drives after making changes.
- Press [MENU] button on ELX16-240 front panel.
- Move to “Quick Setup” menu (First tab on the Configuration menu).
- Move to “Date/Time” below “Quick Setup ” using downward arrow button on ELX16-240 front panel.
- Press the [ENTER] button on ELX16 -240 front panel.
- Set time. (The following picture will be displayed when setting time menu)
- In order to access each menu, press [ENTER] button after selecting it with upward/downward arrow
button on ELX16 -240 front panel.