Rugged Cams ELX DVR 16 Channel - Manual (Page 12)

ELX16-240 Basic Configuration
12 2003.09.06 (v 1.0) Rugged CCTV.
Basic Configuration
3. Monitoring
Once power is supplied to ELX16-240, all connected channels will be displayed by split monitoring
mode (When 8 analog channels are connected, 9-spilit screens will show). Th e following steps apply
for all ELX16 -240’s monitoring menus.
ELX16 -240 supports dual monitor (A, B). Monitor A(Normal) supports all functions, but Monitor
B(Spot) doesn ’t support spilit screen, menu setting and zoom function. However when Monitor A runs
as Playback mode, Monitor B can’t run Playback mode simultaneously.
The following functions are described on the base of Monitor A.
Fo r controlling Monitor A, Monitor A should be selected with the front panel menu.
3.1. Viewing basic screen
- Insert AC cord’s plug in a wall outlet, and
ELX16 -240 starts running automatically.
- LED is on and ELX16-240 starts booting.
- After start-up, a spilit screen is displayed
according to the number of connected channels
(The example is when connecting 4 channels.)
* If user password is set, a dialogue box for
entering the password will appear.
3.2. Viewing single full screen
- Press the desired channel number button on the
front panel of ELX16-240.
- To return to the multi-view screen, press the
[MULTI] button.
3.3. Viewing multi screen
- Press the [MULTI] button to view several
channels simultaneously.
- To change the split screen configuration, press
the [MULTI] button. 4 / 9 / 16 / 13 split screens will be displayed.